Kategoriler Tümünü Gör >

Body CooSage Marks Jr.ling FanDaisha Eichmann Air CoAnnabelle Little MDKory Shieldsoler Carli LoweHeat DissipatiStella LuettgenDr. Darlene Torphyon Body Cooling FDevyn Bergstrom IIKatelyn Brakusan Noise ReductColleen Luettgenion AccArdella LemkeessorieCleta Friesen IVs for Luis BeerDJI MinYasmine Purdyi 3 ProMrs. Deanna Hayes

(0 İncelemeler)
Kargo Süresini Tahmin Edin: 3 günler

Tarafından Satıldı:
Muzaffer baş

Fiyat:
$17.89 /Pc

Miktar:
(4999 mevcut)

Toplam Fiyat:
Paylaşmak:
Tarafından Satıldı
Muzaffer baş
Alaylar iki mah 152308 SK 10/9 güzen AP Seydişehir konya
(0 müşteri yorumları)
Feature:
1. Strong Wind & Soft Sound: The fan is 10,000 rpm, the wind is stronger, and the noise is reduced during high-speed operation.
2. Turbine Fuselage Radiator: Heat dissipation is not hot, strong power, speed of 10,000.
3. Three-gear Wind Adjustment: One-button switch, three-gear adjustment. Three-gear wind adjustment lets you control the wind.
4. Overall Temperature Drops by 5~10°: The drone is often troubled by overheating, and it is hot to the hand. Install a cooling fan, and the overall temperature can drop by 5-10 degrees.
5. Quick Disassembly & Assembly: The installation of the radiator does not affect the normal flight and use of the drone, and the installation and the disassembly is fast.


Specification:
Product name: cooling fan
Product material: 3D
Product size: about 88x75x12mm/3.46*2.95*0.47inch
Product net weight: 39.5g
Packing size: about 94*93*36mm/3.70*3.66*1.42inch
Packaging weight (product + packaging): 62.4g
Applicable models: for DJI MINI 3 PRO
Wind speed gear: three gears (slow, medium, fast):
First gear usage time: about 7 hours
Second gear use time: 230 minutes

Third gear use time: 120 minutes

Battery capacity:450mAh

Charging time: 80 minutes
Charging: the red light is on
Full: Green light is on
Working: the blue light is on

Installation Steps:
1. Align the air outlet of the radiator with the two groove air inlets at the bottom of the drone body.
2. Use an O-ring to wrap the radiator around the fuselage to fix the radiator on the drone, that is, the installation is complete.

Note:
The air outlet is aligned with the two notches at the bottom of the fuselage to enter the air.
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.

Bu ürün için henüz yorum yapılmadı.

İlgili ürünler

Ürün sorgula (0)

Giriş yap or Kayıt olmakSorularınızı satıcıya iletmek için

Diğer Sorular

Hayır henüz satıcıya sorulmadı